The T2LT Antenna Family

The T2LT Antenna Family consists of several coaxial antenna designs. T2LT antennas are designed to be lightweight and portable. The T2LT antenna was designed for extreme conditions, or out in the field use. Whether you are out in your back garden, in a field or on top of a mountain, the T2LT antenna can withstand it all!

 

The simplicity of the T2LT antenna and robustness makes the antenna an ideal piece of kit to have with you out in the field. Making long distance two way radio communication should be easy to do and easy on your pocket!

 

DATATECH offer the following T2LT antennas: T2LT HF, T2LT Outlaw (PMR446 / 70cm) with the following DX additions on the way: T2LT HF Recoil DX, T2LT HF Octal DX (Whiplash DX) and T2LT HF HardCore DX. The DX additions are built to be light and robust just like the standard T2LT antenna, however the DX additions have a wider frequency range. See below for further details.

T2LT-HF-Work-The-World.jpg

T2LT HF

This simple lightweight centre fed dipole CB antenna far outperforms its simple design. Made from low loss high-quality RG58 military grade Coax. This half-wave centre fed dipole antenna rolls up to fit a small pocket of a backpack and punches well above its weight of only 439 grams, under good skip conditions from high ground this antenna will easily achieve a DX of 1000 miles! All from a standard 4 watt CB radio.

 

The antenna is just under 18 feet in length above a 5:1 air choke, and can be mounted to any non conductive pole or hung from a tree.

 

  • Can be mounted vertically or horizontally.

  • Great for camping, hiking or the serious outward bound DX'er.

  • The antenna is finished with about a 5 meter tail and a PL 259 soldered in place.

  • For CB, 10m, 11m, 26MHz - 28MHz, HAM Radio, AM/FM & SSB Bands.

  • 4W - 1000W Power handling.

T2LT-Outlaw-1.jpg

T2LT Outlaw

This simple lightweight centre fed dipole (PMR 446) antenna far outperforms its simple design. Made from low loss high-quality RG58 military grade Coax. This half-wave centre fed dipole antenna rolls up to fit a small pocket of a backpack and punches well above its weight of only 130 grams, under good conditions from high ground this antenna will easily extend your DX range by several miles! All from a standard 0.5 watt PMR radio.

 

The antenna is just under 14 inch in length above a 5:1 air choke, and can be mounted to any non conductive pole or hung from a tree.

 

  • Can be mounted vertically or horizontally.

  • Great for camping, hiking or the serious outward bound DX'er.

  • The antenna is finished with about a 5 meter tail and a PL 259 soldered in place.

  • For PMR, 70cm, HAM Radio Bands (142MHz - 519MHz).

  • 0.5W - 1000W Power handling .

box.png

T2LT HF HardCore DX

This simple lightweight vertical CB antenna far outperforms its simple design. Made from low loss high-quality RG58 military grade Coax. This half-wave antenna punches well above its weight of only 439 grams, under good skip conditions from high ground this antenna will easily achieve a DX of 1000+ miles! All from a standard 4 watt CB radio.

 

Designed for DXing with a broad frequency spectrum, you can set and forget. The antenna is one unit with no splices, this means that less can go wrong. The only connector is at the end of the feed point, where you plug into your radio.

 

The antenna is just under 18 feet in length above a hardcore ferrite RF choke, the antenna can be mounted to any non-conductive pole or hung from a tree.

 

  • Can be mounted vertically or horizontally.

  • Great for camping, hiking or the serious outward bound DX'er.

  • The antenna is finished with about a 5 meter tail and a PL 259 soldered in place.

  • Broadband antenna for CB, 10m, 11m, 24MHz - 30MHz, HAM Radio, AM/FM & SSB Bands.

  • 4W - 1000W Power handling.

  • RF choke enclosure comes with easy release tie wraps for mounting and remounting as needed.

  • Suspended Core - makes sure that the ferrite core is free from shock movement.

box.png

T2LT HF Recoil DX

This simple lightweight centre fed dipole CB antenna far outperforms its simple design. Made from low loss high-quality RG58 military grade Coax. This half-wave centre fed dipole antenna punches well above its weight of only 439 grams, under good skip conditions from high ground this antenna will easily achieve a DX of 1000+ miles! All from a standard 4 watt CB radio.

 

Designed for DXing with a broad frequency spectrum, you can set and forget. The antenna is one unit with no splices, this means that less can go wrong. The only connector is at the end of the feed point, where you plug into your radio.

 

The antenna is just under 18 feet in length above a half wave choke and can be mounted to any non-conductive pole or hung from a tree.

 

  • Can be mounted vertically or horizontally.

  • Great for camping, hiking or the serious outward bound DX'er.

  • The antenna is finished with about a 5 meter tail and a PL 259 soldered in place.

  • Broadband antenna for CB, 10m, 11m, 24MHz - 30MHz, HAM Radio, AM/FM & SSB Bands.

  • 4W - 1000W Power handling.

male head.png

Dover Alava

Nice antenna !!! Perfect SWR 1.1 ... thanks you very much , price cheep and working very well .....

Reviews

male head.png

Clive Bannister

Great outdoor dx antenna
Used to work Europe to great affect. Just by hanging from a tree

male head.png

Stephen Hanson

I have a t2lt and it works great better then some bigger named

DATATECH NORTH EAST

Follow

  • Home
  • Contact
  • Help Desk
  • facebook
  • YouTube
  • Logbook

Address

North East, United Kingdom

Call us: 07340 581 816